Fan Shroud, Removing And Installing, Audi A6: Installing
WARNING: This page is about a different car, the 2015 Audi A7 Quattro, 2014 Audi A7 Quattro, 2013 Audi A7, and 2012 Audi A7. However, it is still accessible from the selected car via links, so may be relevant.
Install in reverse order of removal. Note the following:
-- Connect the coolant hose to the coupling, refer to Figure.
-- Install the bumper cover end plate and the lock carrier cover, refer to BUMPER COVER END PLATE, REMOVING AND INSTALLING, AUDI A7/S7 and LOCK CARRIER COVER, REMOVING AND INSTALLING .
NOTE:
Do not reuse used coolant.
-- Fill the coolant, refer to FILLING .