Auxiliary Cooler, Removing And Installing: Installing

WARNING: This page is about a different car, the 2015 Audi A7 Quattro, 2014 Audi A7 Quattro, 2013 Audi A7, and 2012 Audi A7. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal. Note the following:

NOTE: Secure all hose connections with hose clamps of the same type as those equipped by the factory.

-- Install the bumper cover end plate, refer to BUMPER COVER END PLATE, REMOVING AND INSTALLING, AUDI A7/S7 .

NOTE: Do not reuse used coolant.

-- Fill the coolant, refer to FILLING .