LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2017 >> A7 Quattro Competition >> Repair and Diagnosis >> External Pages >> Different car >> Section 40 (3.0L - Cooling System - Engine Code(S): CGXB & CTUA) >> 19 Cooling System >> Coolant Pump/Thermostat >> Engine Temperature Control Temperature Sensor -G694-, Removing And Installing >> Removing

Engine Temperature Control Temperature Sensor -G694-, Removing And Installing: Removing

WARNING: This page is about a different car, the 2015 Audi A7 Quattro, 2014 Audi A7 Quattro, 2013 Audi A7, and 2012 Audi A7. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the right lower section of the intake manifold, refer to INTAKE MANIFOLD LOWER SECTION WITH FUEL RAIL, REMOVING AND INSTALLING .

-- Disconnect the connector -2-.

Fig 1: Installed Location Engine Temperature Control Sensor -G694-
GWWA15-10924Courtesy of AUDI OF AMERICA, LLC

-- Remove the Engine Temperature Control Sensor -G694- item -1-.