LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2017 >> A7 Quattro Competition >> Repair and Diagnosis >> External Pages >> Different car >> Section 40 (3.0L - Cooling System - Engine Code(S): CGXB & CTUA) >> 19 Cooling System >> Coolant Pump/Thermostat >> Coolant Thermostat, Removing And Installing >> Removing

Coolant Thermostat, Removing And Installing: Removing

WARNING: This page is about a different car, the 2015 Audi A7 Quattro, 2014 Audi A7 Quattro, 2013 Audi A7, and 2012 Audi A7. However, it is still accessible from the selected car via links, so may be relevant.

-- Drain the coolant, refer to Draining .

-- Remove the supercharger, refer to SUPERCHARGER, REMOVING AND INSTALLING .

-- Remove the front coolant pipe, refer to Removing .

NOTE: Place a cloth underneath to catch any coolant leaking out.

-- Remove the bolts -arrows-.

-- Remove the coolant thermostat with the connections.

Fig 1: Coolant Thermostat And Bolts
GWWA19-10756Courtesy of AUDI OF AMERICA, LLC