Coolant Pump, Removing And Installing: Installing

WARNING: This page is about a different car, the 2015 Audi A7 Quattro, 2014 Audi A7 Quattro, 2013 Audi A7, and 2012 Audi A7. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal. Note the following:

-- Clean any oil or grease off the sealing surfaces.

-- Install the lock carrier cover, refer to LOCK CARRIER COVER, REMOVING AND INSTALLING .

-- Install the ribbed belt, refer to RIBBED BELT, REMOVING AND INSTALLING, ACCESSORY RIBBED BELT .

NOTE: Do not reuse used coolant.

-- Fill the coolant, refer to FILLING .