LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2017 >> A7 Quattro Competition >> Repair and Diagnosis >> External Pages >> Different car >> Section 40 (3.0L - Cooling System - Engine Code(S): CGXB & CTUA) >> 19 Cooling System >> Coolant Pipes >> Coolant Pipes, Removing And Installing >> Lower Left Coolant Pipe, Removing And Installing >> Removing

Lower Left Coolant Pipe, Removing And Installing: Removing

WARNING: This page is about a different car, the 2015 Audi A7 Quattro, 2014 Audi A7 Quattro, 2013 Audi A7, and 2012 Audi A7. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Bolts
GWWA19-11113Courtesy of AUDI OF AMERICA, LLC

-- Remove the left engine mount, refer to ENGINE MOUNT, REMOVING AND INSTALLING .

NOTE: Lay a cloth below the coolant pipe to catch escaping coolant.

-- Loosen the clamps -arrows-, remove the hose clamps up to 25 mm diameter 3094 from the left lower coolant pipe.

-- Remove the left lower coolant pipe.

NOTE: Ignore items -1 and 2-.
scientia non olet · About LEMON Manuals