LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2017 >> A7 Quattro Competition >> Repair and Diagnosis >> External Pages >> Different car >> Section 40 (3.0L - Cooling System - Engine Code(S): CGXB & CTUA) >> 19 Cooling System >> Coolant Pipes >> Coolant Pipes, Removing And Installing >> Lower Left Coolant Pipe, Removing And Installing >> Installing

Lower Left Coolant Pipe, Removing And Installing: Installing

WARNING: This page is about a different car, the 2015 Audi A7 Quattro, 2014 Audi A7 Quattro, 2013 Audi A7, and 2012 Audi A7. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal. Note the following:

NOTE: Secure all hose connections with hose clamps of the same type as those equipped by the factory.

-- Install the left engine mount, refer to ENGINE MOUNT, REMOVING AND INSTALLING .

NOTE: Do not reuse used coolant.

-- Fill the coolant, refer to Filling .

scientia non olet · About LEMON Manuals