LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2017 >> A7 Quattro Competition >> Repair and Diagnosis >> External Pages >> Different car >> Section 40 (3.0L - Cooling System - Engine Code(S): CGXB & CTUA) >> 19 Cooling System >> Coolant Pipes >> Coolant Pipes, Removing And Installing >> Left Coolant Pipes, Removing And Installing >> Removing

Left Coolant Pipes, Removing And Installing: Removing

WARNING: This page is about a different car, the 2015 Audi A7 Quattro, 2014 Audi A7 Quattro, 2013 Audi A7, and 2012 Audi A7. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Disconnecting Connector For Wiring To Air Conditioning Compressor Clutch Solenoid
GWWA10-10118Courtesy of AUDI OF AMERICA, LLC

-- Drain the coolant, refer to Draining .

-- Remove the ribbed belt from the A/C compressor, refer to RIBBED BELT, REMOVING AND INSTALLING, ACCESSORY RIBBED BELT .

-- Remove the A/C compressor, refer to A/C COMPRESSOR, REMOVING AND INSTALLING .

-- Remove the left engine mount, refer to ENGINE MOUNT, REMOVING AND INSTALLING .

-- Remove the bolts -arrows- and the engine support with the A/C compressor bracket.

Fig 2: Identifying Left Engine Support With Air Conditioning (A/C) Compressor Bracket
GWWA10-11423Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolts -arrows-.

-- Remove the coolant pipes from the coolant hoses by loosening the hose clamps -1- and -2-.

Fig 3: Identifying Bolts And Coolant Pipe From Engine
GWWA19-10022Courtesy of AUDI OF AMERICA, LLC