LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2017 >> A7 Quattro Competition >> Repair and Diagnosis >> External Pages >> Different car >> Section 38 (Suspension, Wheels & Steering) >> 44 Wheels, Tires, Wheel Alignment >> Vehicle Alignment >> Axle Alignment Specified Values >> Axle Alignment Specified Values, Sedan/Avant Rear Axle

Axle Alignment Specified Values, Sedan/Avant Rear Axle

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2015 Audi S7, 2015 Audi RS 7, 2015 Audi A7 Quattro, 2014 Audi S7, and 2014 Audi RS 7. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:

The specified values apply to all engine versions.

  FWD/AWD
Steel Suspension, All Vehicles Air Suspension, All Vehicles    
Camber - 1°20' ± 25' - 1°20' ± 25'    
Maximum permissible difference between both sides 30' 30'    
Toe for each wheel + 10 ± 5' + 10 ± 5'    
Total toe + 20' ± 10' + 20' ± 10'    
Maximum permissible deviation in direction of travel relative to vehicle longitudinal axis 10' 10'    

Additional Vehicle Data for Vehicles with FWD and AWD:

This additional vehicle data only serves for a faster diagnosis in the case of accidents.

For the table, refer to SUSPENSION .