Perform Any Subsequent Work Using the Vehicle Diagnostic Tester

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2015 Audi S7, 2015 Audi RS 7, 2015 Audi A7 Quattro, 2014 Audi S7, and 2014 Audi RS 7. However, it is still accessible from the selected car via links, so may be relevant.

-- Turn on the ignition.

-- Touch Guided Fault Finding on the touch screen.

-- Select the following in this order:

Brand
Type
Model year
Version
Engine Code

-- Confirm the entered data.

Wait until the Vehicle Diagnostic Tester has checked all the vehicle control module.

-- Press the GO TO button and select "function/component selection".

-- Select the program in Guided Functions .

Follow the instructions on the screen to perform the basic setting.