LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2017 >> A7 Quattro Competition >> Repair and Diagnosis >> External Pages >> Different car >> Section 37 (3.0L - Engine Assembly - Engine Code: CPNB) >> 10 Engine Assembly >> Subframe Mount >> Transmission Mount, Removing And Installing >> Transmission Mount, Removing And Installing, Vehicles With Multitronic >> Removing

Transmission Mount, Removing And Installing, Vehicles With Multitronic: Removing

WARNING: This page is about a different car, the 2015 Audi A7 Quattro and 2014 Audi A7 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Removing Bolts And Removing Lower Stop For Transmission Mount
GWWA37-10742Courtesy of AUDI OF AMERICA, LLC

-- Remove the tunnel crossmember, refer to TUNNEL CROSSMEMBER, REMOVING AND INSTALLING .

-- Remove the bolts -1- and lower stop -2- for the transmission mount.

-- Remove the nut -4- and transmission mount -5- from the transmission support -3-.