LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2017 >> A7 Quattro Competition >> Repair and Diagnosis >> External Pages >> Different car >> Section 37 (3.0L - Engine Assembly - Engine Code: CPNB) >> 10 Engine Assembly >> Subframe Mount >> Transmission Mount, Removing And Installing >> Transmission Mount, Removing And Installing, Vehicles With Automatic Transmission >> Removing

Transmission Mount, Removing And Installing, Vehicles With Automatic Transmission: Removing

WARNING: This page is about a different car, the 2015 Audi A7 Quattro and 2014 Audi A7 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Bolts, Nut, Transmission Mount And Transmission Support
GWWA37-11041Courtesy of AUDI OF AMERICA, LLC

-- Remove the transmission support with the transmission mount, refer to TRANSMISSION SUPPORT WITH TRANSMISSION MOUNT, REMOVING AND INSTALLING, VEHICLES WITH AUTOMATIC TRANSMISSION .

-- Remove the bolt -1- and lower -2- for the transmission mount.

-- Remove the nut -4- and the bolt -5- and remove the transmission mount -6- from the transmission support -3-.