LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2017 >> A7 Quattro Competition >> Repair and Diagnosis >> External Pages >> Different car >> Section 36 (3.0L - Engine Assembly - Engine Code(S): CGXB & CTUA) >> 10 Engine Assembly >> Subframe Mount >> Transmission Mount, Removing And Installing >> Transmission Support With Transmission Mount, Removing And Installing, Vehicles With DSG Transmission >> Removing

Transmission Support With Transmission Mount, Removing And Installing, Vehicles With DSG Transmission: Removing

WARNING: This page is about a different car, the 2015 Audi A7 Quattro, 2014 Audi A7 Quattro, 2013 Audi A7, and 2012 Audi A7. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Bolts
GWWA34-10648Courtesy of AUDI OF AMERICA, LLC

-- Remove the tunnel crossmember, refer to OVERVIEW - SUBFRAME MOUNT .

-- Remove the bolts -arrows- and remove the transmission support with the transmission mount from the transmission.