LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2017 >> A7 Quattro Competition >> Repair and Diagnosis >> External Pages >> Different car >> Section 36 (3.0L - Engine Assembly - Engine Code(S): CGXB & CTUA) >> 10 Engine Assembly >> Subframe Mount >> Transmission Mount, Removing And Installing >> Transmission Mount, Removing And Installing, Vehicles With Automatic Transmission >> Removing

Transmission Mount, Removing And Installing, Vehicles With Automatic Transmission: Removing

WARNING: This page is about a different car, the 2015 Audi A7 Quattro, 2014 Audi A7 Quattro, 2013 Audi A7, and 2012 Audi A7. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the transmission support with the transmission mount, refer to REMOVING .

-- Remove the bolt -1- and lower -2- for the transmission mount.

-- Remove the nut -4- and the bolt -5- and remove the transmission mount -6- from the transmission support -3-.

Fig 1: Identifying Bolts, Nut, Transmission Mount And Transmission Support
GWWA37-11041Courtesy of AUDI OF AMERICA, LLC