Engine Mount
WARNING: This page is about a different car, the 2015 Audi A7 Quattro, 2014 Audi A7 Quattro, 2013 Audi A7, and 2012 Audi A7. However, it is still accessible from the selected car via links, so may be relevant.
- Engine Mount
- Removing and installing, refer to ENGINE MOUNT, REMOVING AND INSTALLING .
- Replace in pairs
- Bolt
- 20 Nm
- Retaining Plate
- For the engine mount
- If the engine mount is faulty, replace the retaining plate
- Check the retaining plate on the opposite side; replace if necessary
- Bolt
- 40 Nm
- Bolt
- 20 Nm
- Engine Support
- Left with A/C compressor bracket
- Heat Shield
- Bolt
- 10 Nm
- Bolt
- 90 Nm +90°
- Replacing
- Subframe
- Bolt
- 55 Nm