DSG Transmission Mount 0B5

WARNING: This page is about a different car, the 2015 Audi A7 Quattro, 2014 Audi A7 Quattro, 2013 Audi A7, and 2012 Audi A7. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying DSG Transmission Mount 0B5 Overview

Courtesy of AUDI OF AMERICA, LLC

Bolt
- Tightening specification, refer to Subframe Mount .
Tunnel Crossmember
- Removing and installing, refer to Subframe Mount .
Stop
- For the transmission mount
Transmission Mount
- Removing and installing, refer to TRANSMISSION MOUNT, REMOVING AND INSTALLING, VEHICLES WITH DSG TRANSMISSION 0B5 .
Bolt
- Tightening specification, refer to Subframe Mount .
Nut
- Tightening specification, refer to Subframe Mount .
Bolt
- Tightening specification, refer to Subframe Mount .
Transmission Support
- Removing and installing, refer to TRANSMISSION SUPPORT WITH TRANSMISSION MOUNT, REMOVING AND INSTALLING, VEHICLES WITH DSG TRANSMISSION .
Bolt
- Tightening specification, refer to Subframe Mount .
Nut
- Tightening specification, refer to Subframe Mount .