Engine, Supporting In Installed Position: Procedure

WARNING: This page is about a different car, the 2015 Audi A7 Quattro, 2014 Audi A7 Quattro, 2013 Audi A7, and 2012 Audi A7. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Foam Block

Courtesy of AUDI OF AMERICA, LLC

-- Remove the left and right foam block -arrow-.

-- Position the Engine Support Bridge 10-222A on the left and right suspension strut towers as shown.

Fig 2: Identifying Engine Support Bridge

Courtesy of AUDI OF AMERICA, LLC

-- Attach the spindles Engine Support Bridge - Spindle 10-222A/11 to the left and right engine lifting eyes.

-- Lightly pretension engine with spindles.