Reducing Agent Tank, Removing And Installing: Installing

WARNING: This page is about a different car, the 2015 Audi A7 Quattro and 2014 Audi A7 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Filling Hose

Courtesy of AUDI OF AMERICA, LLC

Install in reverse order of removal. Note the following:

-- Push the filling line -1- and vent line -2- onto the line connection until it engages audibly.

-- Pull to make sure the connection is engaged correctly.

-- To secure press the retaining tab -3-.

-- Make sure the lines are clipped to the tank.

NOTE:

Ignore item -4-.

-- Adapting adaptation value after draining reducing agent or replacing components, refer to SCR-SYSTEM ADAPTATION VALUE, ADAPTING .