Particulate Sensor -G784-, Removing And Installing: Removing
WARNING: This page is about a different car, the 2015 Audi A7 Quattro and 2014 Audi A7 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:
When working on the whole exhaust system:
- Follow the safety precautions when working on the exhaust system, refer to EXHAUST SYSTEM SAFETY PRECAUTIONS .
-- Remove the rear left cover for the underbody, refer to UNDERBODY PANELS, REMOVING AND INSTALLING .
-- Disconnect the connector -1-.
-- Remove the nuts -arrows-.
-- Free up the wire.
-- Remove the Particulate Sensor -- -2- with a tool from the Diesel Engine Tool Set - 17 mm T10395A.