Exhaust Gas Temperature Sensor 1 -G235-, Installing And Removing, Vehicles With Two Turbochargers: Removing

WARNING: This page is about a different car, the 2015 Audi A7 Quattro and 2014 Audi A7 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Exhaust Gas Temperature Sensors In Turbocharger

Courtesy of AUDI OF AMERICA, LLC

WARNING:

When working on the whole exhaust system:

Follow the safety precautions when working on the exhaust system, refer to EXHAUST SYSTEM SAFETY PRECAUTIONS .

NOTE:

When installing, bring all cable ties back to same positions.

When removing the wire do not cut it, in this case a fault diagnosis will no longer be possible.

-- Remove the catalytic converter, refer to CATALYTIC CONVERTER, REMOVING AND INSTALLING, VEHICLES WITH TWO TURBOCHARGERS .

-- Remove the connector -2- from the bracket, disconnect it and free up the wire.

-- Remove the Exhaust Gas Temperature Sensor 1 -G235- -item 1-.