LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2017 >> A7 Quattro Competition >> Repair and Diagnosis >> External Pages >> Different car >> Section 34 (3.0L - Exhaust System & Emission Controls - Engine Code: CPNB) >> 26 Exhaust System, Emission Controls >> Exhaust Pipes/Mufflers >> Front Exhaust Pipe, Removing And Installing >> Exhaust Pipe, Removing And Installing, Vehicles With Two Turbochargers >> Removing

Exhaust Pipe, Removing And Installing, Vehicles With Two Turbochargers: Removing

WARNING: This page is about a different car, the 2015 Audi A7 Quattro and 2014 Audi A7 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:

When working on the whole exhaust system:

-- Remove the rear noise insulation, refer to REAR NOISE INSULATION, REMOVING AND INSTALLING .

-- Remove the bolts -2- and nuts -1-.

Fig 1: Identifying Bolts
GWWA26-11166Courtesy of AUDI OF AMERICA, LLC

-- Remove the nuts -arrows-, remove the exhaust pipe.

Fig 2: Identifying Nuts
GWWA26-11170Courtesy of AUDI OF AMERICA, LLC