Left Exhaust Manifold, Removing And Installing: Installing

WARNING: This page is about a different car, the 2015 Audi A7 Quattro and 2014 Audi A7 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal. Note the following:

NOTE:

Replace the seals and self-locking nuts.

-- Tighten the exhaust manifold nuts, refer to Figure.

-- Install the ribbed belt, refer to RIBBED BELT, REMOVING AND INSTALLING .

-- Connect the coolant line with the connector coupling, refer to Fig 1.

Fig 1: Connecting Coolant Hose Coupling

Courtesy of AUDI OF AMERICA, LLC

-- Install the Throttle Valve Control Module -J338-, refer to THROTTLE VALVE CONTROL MODULE -J338-, REMOVING AND INSTALLING .

-- Install the particulate filter (refer to PARTICULATE FILTER, REMOVING AND INSTALLING ) or install the catalytic converter (refer to CATALYTIC CONVERTER, REMOVING AND INSTALLING, VEHICLES WITH TWO TURBOCHARGERS ).