SCR Catalytic Converter, Removing And Installing: Removing

WARNING: This page is about a different car, the 2015 Audi A7 Quattro and 2014 Audi A7 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Bolts -1-

Courtesy of AUDI OF AMERICA, LLC

WARNING:

When working on the whole exhaust system:

Follow the safety precautions when working on the exhaust system, refer to EXHAUST SYSTEM SAFETY PRECAUTIONS .

-- Remove the nuts -2-.

NOTE:

Ignore item -1-.

-- Loosen the threaded connections -arrows-, slide the clamping sleeve to the rear and remove the SRC Catalytic Converter.

Fig 2: Identifying Nuts

Courtesy of AUDI OF AMERICA, LLC