LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2017 >> A7 Quattro Competition >> Repair and Diagnosis >> External Pages >> Different car >> Section 33 (3.0L - Exhaust System & Emission Controls - Engine Code(S): CGXB & CTUA) >> 26 Exhaust System, Emission Controls >> Secondary Air Injection System >> Secondary Air Injection Sensor 1 -G609-, Removing And Installing >> Removing

Secondary Air Injection Sensor 1 -G609-, Removing And Installing: Removing

WARNING: This page is about a different car, the 2015 Audi A7 Quattro, 2014 Audi A7 Quattro, 2013 Audi A7, and 2012 Audi A7. However, it is still accessible from the selected car via links, so may be relevant.

-- Disconnect the connector -1-.

-- Unlock the retainers -2 and 3- and remove Secondary Air Injection Sensor 1 -G609-.

Fig 1: Identifying Secondary Air Injection (AIR) Sensor And Retainers
GWWA26-10961Courtesy of AUDI OF AMERICA, LLC
scientia non olet · About LEMON Manuals