LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2017 >> A7 Quattro Competition >> Repair and Diagnosis >> External Pages >> Different car >> Section 33 (3.0L - Exhaust System & Emission Controls - Engine Code(S): CGXB & CTUA) >> 26 Exhaust System, Emission Controls >> Exhaust Pipes/Mufflers >> Front Muffler, Removing And Installing >> Removing

Front Muffler, Removing And Installing: Removing

WARNING: This page is about a different car, the 2015 Audi A7 Quattro, 2014 Audi A7 Quattro, 2013 Audi A7, and 2012 Audi A7. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the rear noise insulation, refer to REAR NOISE INSULATION, REMOVING AND INSTALLING .

-- Remove the left front muffler nuts -arrows-.

Fig 1: Identifying Left Front Muffler Nuts
GWWA26-11055Courtesy of AUDI OF AMERICA, LLC

-- Remove the right front muffler nuts -arrows-.

Fig 2: Identifying Right Front Muffler Nuts
GWWA26-11056Courtesy of AUDI OF AMERICA, LLC
Fig 3: Identifying Bolts - Vehicles With Dual Exhaust System
GWWA26-10535Courtesy of AUDI OF AMERICA, LLC
CAUTION:

The decoupling elements in the front muffler could be damaged.

  • Do not bend decoupling element in front muffler more than 10°.

-- Loosen the clamping sleeve -1- or -2-, slide it back and remove the corresponding front muffler.