LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2017 >> A7 Quattro Competition >> Repair and Diagnosis >> External Pages >> Different car >> Section 33 (3.0L - Exhaust System & Emission Controls - Engine Code(S): CGXB & CTUA) >> 26 Exhaust System, Emission Controls >> Emissions Control >> Catalytic Converter, Removing And Installing >> Catalytic Converters, Removing, Automatic Transmission >> Installing

Catalytic Converters, Removing, Automatic Transmission: Installing

WARNING: This page is about a different car, the 2015 Audi A7 Quattro, 2014 Audi A7 Quattro, 2013 Audi A7, and 2012 Audi A7. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal. Note the following:

NOTE:

Replace the seals and self-locking nuts.

-- Install the steering intermediate shaft, refer to STEERING INTERMEDIATE SHAFT, REMOVING AND INSTALLING .

-- Install the plenum chamber bulkhead, refer to PLENUM CHAMBER BULKHEAD, REMOVING AND INSTALLING .

-- Install the front muffler, refer to FRONT MUFFLER, REMOVING AND INSTALLING .

scientia non olet · About LEMON Manuals