Secondary Air Injection Pump Motor -V101-, Removing And Installing: Installing
WARNING: This page is about a different car, the 2015 Audi S7, 2015 Audi RS 7, 2014 Audi S7, 2014 Audi RS 7, and 2013 Audi S7. However, it is still accessible from the selected car via links, so may be relevant.
Install in reverse order of removal. Note the following:
NOTE:
Replace the O-rings.
Secure all hose connections with hose clamps of the same type as those equipped by the factory .
-- Check the coolant level, refer to COOLANT, DRAINING AND FILLING .