Combination Valve, Removing And Installing: Removing

WARNING: This page is about a different car, the 2015 Audi S7, 2015 Audi RS 7, 2014 Audi S7, 2014 Audi RS 7, and 2013 Audi S7. However, it is still accessible from the selected car via links, so may be relevant.

NOTE:

Removing and installing for cylinder bank 2 (left) is described.

Ignore item -1-.

-- Remove the housing for the charge air cooler, refer to CHARGE AIR COOLER HOUSING, REMOVING AND INSTALLING .

-- Disconnect the vacuum hose -1-.

-- Remove the bolts -2- and the secondary air injection combination valve.

Fig 1: Identifying Secondary Air Injection Combination Valve Bolts

Courtesy of AUDI OF AMERICA, LLC