Muffler, Removing And Installing: Removing

WARNING: This page is about a different car, the 2015 Audi S7, 2015 Audi RS 7, 2014 Audi S7, 2014 Audi RS 7, and 2013 Audi S7. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the crossbrace, refer to OVERVIEW - HEAT SHIELD .

-- If equipped remove the diagonal brace, refer to SUBFRAME .

Fig 1: Identifying Bolts Vehicles With Dual Exhaust System

Courtesy of AUDI OF AMERICA, LLC

CAUTION:

The decoupling elements in the front muffler could be damaged.

Do not bend decoupling elements in front muffler more than 10°.

-- Loosen the clamping sleeves -1 and 2- and slide them toward the rear.

-- Tie up the front muffler to the underbody.

-- Disconnect the left and right connector -3-.

Fig 2: Clamping Sleeves & Connectors

Courtesy of AUDI OF AMERICA, LLC

WARNING:

Risk of accident due to the weight of the muffler.

To remove the muffler a second technician is required.

-- Remove the bolts -1 and 2- and then remove the muffler.