LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2017 >> A7 Quattro Competition >> Repair and Diagnosis >> External Pages >> Different car >> Section 31 (Exterior Equipment) >> 66 Exterior Equipment >> Wheel Housing Liner >> Front Wheel Housing Liner, Removing And Installing >> Cover, Removing And Installing, Longitudinal Member >> Removing

Cover, Removing And Installing, Longitudinal Member: Removing

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2015 Audi S7, 2015 Audi RS 7, 2015 Audi A7 Quattro, 2014 Audi S7, and 2014 Audi RS 7. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Cover & Bracket
GWWA66-10869Courtesy of AUDI OF AMERICA, LLC

-- Remove the front wheel housing liner. Refer to FRONT WHEEL HOUSING LINER, REMOVING AND INSTALLING .

-- Drill out the rivets -4- and remove the bracket -3- for the brake hose.

-- Lift the cover -2- and remove it.