LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2017 >> A7 Quattro Competition >> Repair and Diagnosis >> External Pages >> Different car >> Section 31 (Exterior Equipment) >> 66 Exterior Equipment >> Molding/Trim/Extensions/Trim Panels >> Sill Panel Trim, Removing And Installing >> Removing

Sill Panel Trim, Removing And Installing: Removing

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2015 Audi S7, 2015 Audi RS 7, 2015 Audi A7 Quattro, 2014 Audi S7, and 2014 Audi RS 7. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Removing Sill Panel Trim
GWWA66-10798Courtesy of AUDI OF AMERICA, LLC

Vehicles with Fiber Optic cable for Ambient Lighting:

-- Remove the sill panel strip. Refer to Passenger Side Instrument Panel Vent, Removing and Installing .

-- Remove the inner door seal. Refer to OUTER DOOR SEAL, REMOVING AND INSTALLING .

-- Disconnect the connector.

Continuation for all Vehicles:

-- Carefully warm the sill panel strip -1- using the Hot Air Blower VAG1416.

-- Carefully pry off the sill panel strip -2- using the Trim Removal Wedge 3409 -arrow-.