Plenum Chamber Bulkhead Heat Shield, Removing And Installing, Vehicles With TDI Engine: Removing

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2015 Audi S7, 2015 Audi RS 7, 2015 Audi A7 Quattro, 2014 Audi S7, and 2014 Audi RS 7. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Plenum Chamber Bulkhead Heat Shield - Vehicles With TDI Engine

Courtesy of AUDI OF AMERICA, LLC

-- Remove the plenum chamber bulkhead. Refer to PLENUM CHAMBER BULKHEAD, REMOVING AND INSTALLING .

-- Remove the lock washers -arrows-.

-- Remove the heat shield -1- from the plenum chamber bulkhead.