LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2017 >> A7 Quattro Competition >> Repair and Diagnosis >> External Pages >> Different car >> Section 31 (Exterior Equipment) >> 66 Exterior Equipment >> Molding/Trim/Extensions/Trim Panels >> Plenum Chamber Bulkhead Heat Shield, Removing And Installing >> Plenum Chamber Bulkhead Heat Shield, Removing And Installing, Vehicles With Gasoline Engine >> Removing

Plenum Chamber Bulkhead Heat Shield, Removing And Installing, Vehicles With Gasoline Engine: Removing

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2015 Audi S7, 2015 Audi RS 7, 2015 Audi A7 Quattro, 2014 Audi S7, and 2014 Audi RS 7. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Plenum Chamber Bulkhead Heat Shield - Vehicles With Gasoline Engine
GWWA66-10833Courtesy of AUDI OF AMERICA, LLC

-- Remove the plenum chamber bulkhead. Refer to PLENUM CHAMBER BULKHEAD, REMOVING AND INSTALLING .

-- Remove the lock washers -arrows-.

-- Remove the heat shield -1- from the plenum chamber bulkhead.