Drip Rail, Removing And Installing
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2015 Audi S7, 2015 Audi RS 7, 2015 Audi A7 Quattro, 2014 Audi S7, and 2014 Audi RS 7. However, it is still accessible from the selected car via links, so may be relevant.
- Blind Rivet
- Quantity: 5
- Rivet the guide rails beginning at the top.
- Guide Rail
- To remove, drill out rivet heads -4- and drive out rivet shafts.
- Drip Rail
- Press into the guide rail as far as the stop, beginning at the top and working toward the bottom.
- Check for flushness at the transition to the >>A-pillar<<.