B-Pillar Trim, Removing And Installing: Installing
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2015 Audi S7, 2015 Audi RS 7, 2015 Audi A7 Quattro, 2014 Audi S7, and 2014 Audi RS 7. However, it is still accessible from the selected car via links, so may be relevant.
- Tightening specification. Refer to OVERVIEW - TRIM STRIP AND COVERS .
Install in reverse order of removal. Note the following:
-- Mount the B-pillar trim -1- on the B-pillar and push it upward. The guide -2- must fit into the mount -3-.
- The B-pillar trim will lock into the opening -arrow- in the left -5- and right -4- door seal when it is pushed upward.
-- Press on the B-pillar trim.