LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2017 >> A7 Quattro Competition >> Repair and Diagnosis >> External Pages >> Different car >> Section 31 (Exterior Equipment) >> 66 Exterior Equipment >> Molding/Trim/Extensions/Trim Panels >> A-Pillar Trim, Removing And Installing

A-Pillar Trim, Removing And Installing

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2015 Audi S7, 2015 Audi RS 7, 2015 Audi A7 Quattro, 2014 Audi S7, and 2014 Audi RS 7. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: A-Pillar Trim
GWWA57-10622Courtesy of AUDI OF AMERICA, LLC

-- Remove the door trim panel. Refer to OVERVIEW - A-PILLAR TRIM PANEL

-- Remove the inner window shaft strip -3- over the bolt -3-.

-- Remove the bolt and the triangular trim -2-.

-- The triangular trim must hook into the inner window shaft strip and into the door as illustrated.

-- Tighten bolt to 2 Nm.