Removing the Front Noise Insulation
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2015 Audi S7, 2015 Audi RS 7, 2015 Audi A7 Quattro, 2014 Audi S7, and 2014 Audi RS 7. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the bolts -1 and 2- and open the quick-release fasteners -3 and 4-.
-- Remove the front noise insulation -5- toward the rear.
- When doing this, the guides on the noise insulation will disengage.
-- Remove front noise insulation.
Install in reverse order of removal. Pay attention to the tightening specifications.