Oil Level, Checking With Oil Level Tester
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2015 Audi S7, 2015 Audi RS 7, 2015 Audi A7 Quattro, 2014 Audi S7, and 2014 Audi RS 7. However, it is still accessible from the selected car via links, so may be relevant.
Special tools and workshop equipment required
- Oil Gauge Tester T40178
Marking field on the oil level tester:
| - | - |
Perform the following procedure:
-- Adjust the oil gauge tester to the engine specific set value from the table on the above scale - arrow- by opening the opening the knurled screw and moving the adjusting ring.
NOTE:
The lower edge of the adjusting ring indicates the actual value.
-- Insert the oil gauge tester all the way (up the ring) into the oil dipstick tube. Pull it out again and check the oil level.
-- Read the value on the scale and compare it with the value from the following table.
| Engine | Adjusting value on the upper adjusting ring | Minimum oil level on the lower scale | Maximum oil level on the lower scale |
| 2.0L TFSI and 2.0L TFSI Hybrid | 39 | 0 | 24 |
| 3.0L TFSI (Not for engines CLX* and CNY*) | 132 | 0 | 13 |
| 4.0 TFSI | 185 | 0 | 21 |
| 3.0 TDI through MY 2011 | 83 | 0 | 16 |
| 3.0 TDI after MY 2012 | 87 | 0 | 12 |