LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2017 >> A7 Quattro Competition >> Repair and Diagnosis >> External Pages >> Different car >> Section 3 (Maintenance Procedures) >> 03 Maintenance, Diagnosis >> Maintenance Procedures >> Brake Fluid, Changing >> Front Axle

Front Axle

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2015 Audi S7, 2015 Audi RS 7, 2015 Audi A7 Quattro, 2014 Audi S7, and 2014 Audi RS 7. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:

Vehicles with: Brake caliper with two bleed screws.

If there are two bleeder screws, first connect the inner bleeder screw and then the outer.

-- Remove the cap -1- from the bleed screw on the left front brake caliper.

Fig 1: Identifying Bleeder Screw Cap
GWWN01-10746Courtesy of AUDI OF AMERICA, LLC

-- Attach the bleed hose container -1- to the bleeder screw on the inside of the wheel rim.

Fig 2: Identifying Collector Bottle Bleeder Hose
GWWN01-10787Courtesy of AUDI OF AMERICA, LLC

-- Open bleeder screw and let the corresponding amount of brake fluid (see Sequence and Brake Fluid Capacity Table ) flow out.

-- Close bleeder screw.

-- Reattach the brake caliper bleeder screw cap.

-- Repeat the steps for the front right.

- -