Vehicle Diagnostic Tester, Connecting

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2015 Audi S7, 2015 Audi RS 7, 2015 Audi A7 Quattro, 2014 Audi S7, and 2014 Audi RS 7. However, it is still accessible from the selected car via links, so may be relevant.

Special tools and workshop equipment required

Vehicle Diagnosis, Testing and Information System VAS 5052A

Fig 1: Identifying VAS 5052 Vehicle Diagnostic And Service Information System
Courtesy of AUDI OF AMERICA, LLC
Or: Diagnostic System VAS 6150B
Or: Diagnostic System VAS 6160
Diag.Cable For VAS 5052 (2 meter) VAS 5052/3 A

Fig 2: Diag. Cable For VAS 5052 (2 Meter) VAS 5052/3 A
Courtesy of AUDI OF AMERICA, LLC
Remote Diagnosis Head VAS 5054A
Diagnosis Interface VAS 5055
USB Bluetooth Adapter VAS 5054/2

NOTE: Make sure that the selected Vehicle Diagnostic Tester is only used with the matching cable.

WARNING:

During a road test you must always secure testing and measuring equipment on the back seat.
Drivers must NEVER operate these tools while driving.

Perform the following procedure:

-- Connect the diagnostic cable connector to the diagnostic connection.

Fig 3: Identifying Diagnostic Cable Connector

Courtesy of AUDI OF AMERICA, LLC

-- Switch on the Vehicle Diagnostic Tester.

-- Switch on the ignition.

-- Follow the touch screen menu to start the function you want.