LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2017 >> A7 Quattro Competition >> Repair and Diagnosis >> External Pages >> Different car >> Section 29 (Interior Lights, Lamps & Switches) >> 96 Interior Lights, Lamps, Switches >> Description And Operation >> Headlamp Assistant, Humidity Sensor And Lane Assist Overview

Headlamp Assistant, Humidity Sensor And Lane Assist Overview

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2015 Audi S7, 2015 Audi RS 7, 2015 Audi A7 Quattro, 2014 Audi S7, and 2014 Audi RS 7. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Headlamp Assistant, Humidity Sensor And Lane Assist Overview
GWWA96-10752Courtesy of AUDI OF AMERICA, LLC
  1. Front Cover
    • For the housing for the Automatic high beam control module -J844- with Light recognition sensor -G399-.
  2. Upper Cover
    • For the Automatic high beam control module -J844-.
  3. Interior Rearview Mirror
    • Vehicles with Automatic high beam control module -J844- with Light recognition sensor -G399-.
    • Automatic high beam control module -J844- with Light recognition sensor -G399- integrated inside the interior rearview mirror. Cannot be replaced separately if faulty.
    • Interior Rearview Mirror, removing and installing, refer to 68 INTERIOR EQUIPMENT .
  4. Upper Cover
    • For the directional stabilization assistance control module -J759-.
  5. Directional Stabilization Assistance Control Module -J759-
  6. Lower Cover
    • For the Directional stabilization assistance control module -J759-.
  7. Rear Cover
  8. Central Connector
  9. Humidity Sensor -G355-