Charge Air Cooling Circuit Cooler, Removing And Installing, AUDI RS6/RS7: Installing

WARNING: This page is about a different car, the 2015 Audi S7, 2015 Audi RS 7, 2014 Audi S7, 2014 Audi RS 7, and 2013 Audi S7. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal. Note the following:

NOTE:

If there are small impressions on the fins, refer to COOLER AND CONDENSER ASSEMBLY .

Secure all hose connections with hose clamps of the same type as those equipped by the factory.

All of the coolant must be changed if the radiator was replaced.

-- Install the front bumper cover, refer to FRONT BUMPER .

-- Check the coolant level, refer to Check the Coolant Level .