Right Auxiliary Cooler, Removing And Installing, AUDI RS6/RS7: Removing

WARNING: This page is about a different car, the 2015 Audi S7, 2015 Audi RS 7, 2014 Audi S7, 2014 Audi RS 7, and 2013 Audi S7. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the front right wheel spoiler, refer to WHEEL HOUSING LINER .

-- Drain the coolant, refer to Draining .

Audi RS6:

-- Remove the right headlamp, refer to Description and Operation .

Audi RS7:

-- Remove the front bumper cover, refer to FRONT BUMPER .

-- Open the retaining tabs in direction of -arrows-, remove the air duct -1- from the front.

Fig 1: Identifying Air Duct

Courtesy of AUDI OF AMERICA, LLC

-- Remove the nut -arrow- and free up the coolant line -1-.

Fig 2: Identifying Nut

Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolts -3-.

-- If the auxiliary cooler is replaced, remove bolt -4- and bracket -2-.

-- Place the Shop Crane - Drip Tray VAS 6208 underneath.

-- Remove the coolant hoses, to do so, loosen the hose clamps -arrows-.

-- Remove the right auxiliary cooler.

Fig 3: Identifying Right Auxiliary Cooler

Courtesy of AUDI OF AMERICA, LLC