Right Auxiliary Cooler, Removing And Installing, AUDI RS6/RS7: Installing

WARNING: This page is about a different car, the 2015 Audi S7, 2015 Audi RS 7, 2014 Audi S7, 2014 Audi RS 7, and 2013 Audi S7. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal. Note the following:

NOTE:

If there are small impressions on the fins, refer to COOLER AND CONDENSER ASSEMBLY .

Secure all hose connections with hose clamps of the same type as those equipped by the factory.

-- Install the headlamps, refer to Description and Operation .

-- Install the front bumper cover, refer to FRONT BUMPER .

NOTE: Do not reuse used coolant.

-- Fill the coolant, refer to Filling .