LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2017 >> A7 Quattro Competition >> Repair and Diagnosis >> External Pages >> Different car >> Section 27 (4.0L - Cooling System - Engine Code(S): CEUC & CRDB) >> 19 Cooling System >> Coolant Pump/Thermostat >> Engine Coolant Temperature Sensor/Engine Temperature Control Sensor -G62 - / -G694-, Removing And Installing >> Installing

Engine Coolant Temperature Sensor/Engine Temperature Control Sensor -G62 - / -G694-, Removing And Installing: Installing

WARNING: This page is about a different car, the 2015 Audi S7, 2015 Audi RS 7, 2014 Audi S7, 2014 Audi RS 7, and 2013 Audi S7. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal. Note the following:

NOTE: Replace the O-rings.

Audi S6/RS6/RS7: 

-- Install the radiator, with the fan shroud, refer to Installing .

Audi S7: 

-- Install the fan shroud, refer to Installing .

Continuation for All Vehicles: 

-- Check the coolant level, refer to Check the Coolant Level .