Engine Coolant Circulation Pump 2 -V178-, REMOVING AND INSTALLING: Installing

WARNING: This page is about a different car, the 2015 Audi S7, 2015 Audi RS 7, 2014 Audi S7, 2014 Audi RS 7, and 2013 Audi S7. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal. Note the following:

NOTE:

Secure all hose connections with hose clamps of the same type as those equipped by the factory.

When installing, bring all cable ties back to same positions.

-- Install the catalytic converter, refer to CATALYTIC CONVERTER, REMOVING AND INSTALLING .

-- Install the wires, refer toDESCRIPTION AND OPERATION and => appropriate System Wiring Diagram Information.

NOTE: Do not reuse used coolant.

-- Fill the coolant, refer to Filling .