LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2017 >> A7 Quattro Competition >> Repair and Diagnosis >> External Pages >> Different car >> Section 27 (4.0L - Cooling System - Engine Code(S): CEUC & CRDB) >> 19 Cooling System >> Coolant Pipes >> Coolant Pipes, Removing And Installing >> Lower Front Coolant Lines, Removing And Installing >> Installing

Lower Front Coolant Lines, Removing And Installing: Installing

WARNING: This page is about a different car, the 2015 Audi S7, 2015 Audi RS 7, 2014 Audi S7, 2014 Audi RS 7, and 2013 Audi S7. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal. Note the following:

NOTE: Secure all hose connections with hose clamps of the same type as those equipped by the factory.

-- Install the bumper cover end plate, refer to FRONT BUMPER .

NOTE: Do not reuse used coolant.

-- Fill the coolant, refer to Filling .

scientia non olet · About LEMON Manuals