Charge Air Pressure Sensor -G31- / Intake Air Temperature Sensor -G42-, REMOVING AND INSTALLING: Removing

WARNING: This page is about a different car, the 2015 Audi A7 Quattro and 2014 Audi A7 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the left front wheel spoiler, refer to Wheel Housing Liner .

-- Disconnect the connector -2-.

Fig 1: Component location Charge Air Pressure Sensor - G31- / Intake Air Temperature Sensor -G42-

Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolts -1- and pull the Charge Air Pressure Sensor - G31- /Intake Air Temperature Sensor -G42- off the air guide pipe.