LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2017 >> A7 Quattro Competition >> Repair and Diagnosis >> External Pages >> Different car >> Section 23 (Body Exterior - Body Front) >> 50 Body Front >> Plenum Chamber Cover, Removing And Installing >> Cowl, Removing And Installing >> Removing

Cowl, Removing And Installing: Removing

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2015 Audi S7, 2015 Audi RS 7, 2015 Audi A7 Quattro, 2014 Audi S7, and 2014 Audi RS 7. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Clip -1- -Arrow A-, Cowl Panel -2- & -Arrows B-
GWWA50-10157Courtesy of AUDI OF AMERICA, LLC

-- Remove the plenum chamber cover. Refer to PLENUM CHAMBER COVER, REMOVING AND INSTALLING .

-- Remove the windshield wiper arms. Refer to REMOVAL AND INSTALLATION .

-- Remove the clip -1- -arrow A-.

CAUTION:

Danger of causing damage to the wind cowl.

  • Coat the transition between the windshield and the cowl panel with a soapy solution.

-- Remove the cowl panel -2- from the retainer -4- on the windshield -3- vertically upward -arrows B- starting on the edge of the glass.