Plenum Chamber Bulkhead, Removing And Installing: Installing
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2015 Audi S7, 2015 Audi RS 7, 2015 Audi A7 Quattro, 2014 Audi S7, and 2014 Audi RS 7. However, it is still accessible from the selected car via links, so may be relevant.
Install in reverse order of removal. Note the following:
-- Make sure the seal -2- on the plenum chamber bulkhead -1- fits correctly into the mount -3- on the plenum chamber.
-- Check the coolant level. Refer to [For engine(s) CEUC,CRDB] Cooling System[For engine(s) CTUA,CGXB] Cooling System[For engine(s) CPNB] Cooling System .